Buying Hitachi C7BMR 7-1/4 15-Amp Circular Saw with Brake and IDI Technology

I just accustomed this saw a brace of canicule ago. I accept done some antecedent testing (plywood cutting). I accept not yet acclimated this saw for a cogent bulk of time yet. My advised use for this saw is to breach down 3/4" besom plywwod to be acclimated for kitchen chiffonier carcasses. To do this I intend to use an EZ Smart Eurakazone abject and adviser system. The abyss acclimation of the saw is not actual smooth but functions able-bodied enough. I was afraid that Hitachi did not install one of those numbersed abyss of brand indicators abreast the rear of the depth/blade housing. this is Ok for me. Over 95% of my acid will be with 3/4" and some 3/8" plywwod. Since I am traveling to use ths saw for accomplishment acid I did not install the supplied 24 tooth brand that came with the saw. I installed a new 60 tooth Freud accomplishment blade. I fabricated some antecedent balloon cuts on some 3/4" OSB I had lying around. CUTS SMOOTH AS BUTTER! Plenty of power actual low vibrations actual acceptable grips actual simple to control and the cuts (with the Freud 60 tooth blade) were actual smooth. Also anchor chock-full brand in about 2 to 3 seconds. For assurance and to accomplish a alternation of cuts rapidily the anchor is a actual acceptable feature. I usually like to accumulate my accoutrement in a case but in this instance abridgement of a supplied case is not a problem. I intend to install the EZ Smart abject which a lot of acceptable would anticipate it applicable into a banal case anyway. I just put the saw aback in supplied agenda lath box and alone all into a $1.99 orange bag from the Big Orange Box Store. I'll will add to this analysis afterwards I install on EZ Smart Abject and Adviser Arrangement and do some added cutting. All in all I am actual satisifed with this purchase. This is a actual acceptable saw for the money and the alone one I could acquisition of this superior and amount ambit that comes with a brake. This weekend (3/15/10) I installed EZ Smart Base. I afresh (with the 60 tooth Freud Blade) cut a agglomeration of 3/4 OSB. Again admirable bland cuts Simple to Handle actual low vibration abundant control. This weekend (4/2/10) I rip cut some 3/4" harder Maple for Face Frames with the saw. Once again admirable bland cuts Simple to Handle actual low vibration abundant ascendancy ALLs GOOD with this saw.

Buying Hitachi C7BMR 7-1/4 15-Amp Circular Saw with Brake and IDI Technology